-
Building Materials
- Building Materials
- View all Building Materials
- Bricks
- Construction Additives
- Blocks
- Aggregate
- Cement Mix & Mortar
- Floor, Loft & Wall Insulation
- Concrete & Metal Lintels
- Plaster and Plasterboards
- Mesh, Wall Ties, DPC & Meter Boxes
- Jumbo Bags, Rubble Sacks & Hessian
- Reinforcement Mesh
- Jumbo Storage Bags
- Roofing, Fascias and Soffits
- Underground Drainage Supplies
- Timber
- Landscaping & Gardening
- Tools & Workwear
- Hardware & Fixings
-
Painting & Decorating
- Painting & Decorating
- View all Painting & Decorating
- Painting and Decorating
-
Sealants, Mastics & Glue
- Sealants, Mastics & Glue
- View all Sealants, Mastics & Glue
- Glue, Adhesives, Anchor Resin
- Sealants, Mastic, Adhesive, Lubricant
- Fillers, Wood Filler, Foam
- Concrete Repair, Release Oil, Flooring
- Cleaners, Floor Protection
- Roof Repair, Bitumen
- Tile, Tile Accessories, Tile Adhesives, Grout & Levelling Compound
- Mastic Guns
- Driveway and Patio Sealers
- Sealants
-
VAT: Inc Ex
VAT
Inc
Ex
4.0x45 CLASSIC SCREW PZ2 CSK 200no. Per Box 40045CLAF
SKU
BSC-60003048
Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
40° deep single thread to provide a secure fixing with high pull-out resistance
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Recess Type : Pozi
Point Type : 25° Sharp with Single Slash
Double countersunk reduces the likelihood of head shear and assists completion of countersinking
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
40° deep single thread to provide a secure fixing with high pull-out resistance
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Recess Type : Pozi
Point Type : 25° Sharp with Single Slash
Show more +
Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
40° deep single thread to provide a secure fixing with high pull-out resistance
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Recess Type : Pozi
Point Type : 25° Sharp with Single Slash
Double countersunk reduces the likelihood of head shear and assists completion of countersinking
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
40° deep single thread to provide a secure fixing with high pull-out resistance
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Recess Type : Pozi
Point Type : 25° Sharp with Single Slash
Features
| Product Finish | Zinc Yellow |
|---|---|
| Length mm | 45mm |
| Width mm | 4mm |
| Product Material | Carbon Steel |
| Product Net Weight kg | 0.5 |
| Manufacturer Bullet 1 | Double countersunk reduces the likelihood of head shear and assists completion of countersinking |
| Manufacturer Bullet 2 | Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion |
| Manufacturer Bullet 3 | 40° deep single thread to provide a secure fixing with high pull-out resistance |
| Manufacturer Bullet 4 | Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility |
| Manufacturer Bullet 5 | Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge |
| Packaged Length mm | 96mm |
| Manufacturer Bullet 6 | All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length |
| Packaged Width mm | 92mm |
| Product Certifications | BS EN 14592:2008 |
| Manufacturer Bullet 7 | Recess Type : Pozi |
| Pallet Cage Width mm | 286mm |
| Manufacturer Bullet 8 | Point Type : 25° Sharp with Single Slash |
| Pallet Cage Length mm | 394mm |
| Pallet Cage Height mm | 202mm |
| Pallet Cage Weight kg | 17.72 |
| Pallet Cage Barcode | 5055017507870 |
Delivery Information
We offer FREE local delivery on all orders over £120.00 (£100.00 excluding vat). For all other orders a £12.00 (£10.00 plus vat) local delivery charge will apply. We deliver within a 15 mile radius of our depot.
We aim to deliver stocked items usually within 2-3 working days but in busier periods this can sometimes take longer. On receipt of your order we will contact you as soon as possible to advise an intended delivery date, should this delivery date be inconvenient then we will try our best to accommodate a suitable delivery date.
Click & Collect Information
Orders can also be collected from either of our depots. We will contact you by phone or email when your order is ready for collection.
We aim to process your order and have goods ready for collection within the same working day (stocked items only) on all orders placed before 1pm, orders after 1pm will be ready the following working day. In the event of your ordered items being out of stock we will contact you with an estimated lead time on your order.